Problem z dyskiem

Witam,

mam dysk Seagate 300GB, od jakiegoś czasu podczas ładowania systemu z innego
dysku ale przy tym podłączonym zaczęły wyskakiwać jakieś błędy właśnie na
tamtym dysku 300 GB, ogólnie olewałem to, ale dzisiaj dysk w ogóle nie chce
się logować do systemu (BIOS go wykrywa). Tak więc w systemie nie widzę
dysku, nie widzę danych.

Jak odzyskać dane?
Jakim programikiem sprawdzić, co się wlaściwie stało?

Oto zrzut z analizy SMARTA przez SpeedFan: (kiedy SpeedFan go analizował,
komp się zawieszał na kilkadziesiąt senund).

Your hard disk is a ST3300622AS with firmware 3.AAH.
Your hard disk is not reporting its temperature. Some other hard disks with
the same model number are able to report their temperature. Sometimes it is
necessary to run some utility to enable this feature.
Your hard disk's S.M.A.R.T. attributes are now being analyzed and a full
report about the reliability, health and status of your hard disk is
generated:

      Error: Ultra DMA CRC Error Rate has reached its threshold. Current
value is 0 and threshold is 0.
      Error: Unknown attribute 65 has reached its threshold. Current
value is 0 and threshold is 0.

According to S.M.A.R.T. specifications, your hard disk is failing and needs
to be immediately replaced. Backup your data as soon as possible.

      Warning: Ultra DMA CRC Error Rate reached, in the past, its
threshold. Worst value is 0 and threshold is 0.
      Warning: Unknown attribute 255 reached, in the past, its threshold.
Worst value is 0 and threshold is 191.
      Warning: Unknown attribute 65 reached, in the past, its threshold.
Worst value is 0 and threshold is 0.

Your hard disk is now being compared to real data used to define normal
values for your specific hard disk model. This way, the analysis can
automatically use proper operating ranges. The images give you an idea of
how each attribute is within such range. Current and raw values are shown
for easier reference for experienced users. There are 1471 hard disk models
in the current archive.

NOTE: not all warnings are reflected on fitness and performance overall
values as relevancy is based upon the settings from the hard disk
manufacturer who is the best entity deputed to define such relationships.

NOTE : your hard disk Ultra DMA CRC Error Rate attribute current value (0)
is below the normal range (200 - 200) reported for your specific hard disk
model. This usually means that some communication errors occurred between
the hard disk and the external controller. Most likely those errors are due
to the cable. Double check it, reroute it and, if needed, replace it.

The overall fitness for this drive is 0%.
The overall performance for this drive is 100%.
Received on Mon Apr 16 18:30:07 2007